- Description
- Technical Specifications
- User Guide
Description
The chiselled, rough face of Brasilia will bring texture and design to any ordinary space. Brasilia is a great choice for accent walls in a kitchen, bathroom, living room or even a spa area. The natural look of the Brasilia stones will give an atmosphere of tranquillity and serenity to any room. These ledgestones will suit the most contemporary to eclectic home décors.
The Brasilia ledgestones are also perfectly suited to be installed on a façade wall or on large garden walls. They will blend beautifully with patio furniture and will be enhanced with accent exterior lighting.
Made of reconstituted stone, these ledgestones are very easy to install. No grout is required. The ledgestones are a new generation of veneer stones manufactured to make installation as simple as possible. The preparation and installation are quick and easy and a professional result is easily attainable by using the step-by-step instructions or by watching the online instruction video. The installation is as easy on an exterior wall as on an interior wall. The Brasilia ledgestones are suited to be used around fireplace surrounds or in humid areas such as a bathroom.
It is also very easy to maintain on the interior with the use of a hoover. To protect the beauty of these ledgestones it is recommended to use the suggested protection spray.
Technical Specifications
Product Data
| Shape | Rectangular  |
|---|---|
| Dimensions | 20 x 10 cm, 30 x 10 cm, 50 x 10 cm |
| Thickness | 1.3 – 2.8 cm |
| Color | Arctic, Cream |
| Material | Cement based |
| Reaction to fire | |
| M Classification |
Packaging
| Pieces per box | 14 – 18 |
|---|---|
| Coverage per box | 0.50 sqm ±5% |
| Weight per box | 17.9 kg |
| Packaging type | Recycled cardboard box – 80% |
Installation
| Installation style | |
|---|---|
| Recommended joint width | 0 cm |
| Requires adhesive | Yes |
| 34.91kg ±5% |
Recommendations and specifications
Installation surfaces: Plaster, plasterboard, bricks, concrete, concrete bricks, plastered/rendered surfaces, wood, ceramic tiles, depending on the specifications of the used adhesive. The surface on which the product is installed must be in good condition, dry, dust free, stable, and protected against water infiltration.
Exceptions: The products should not be installed on the floor, ceiling, on surfaces or in areas with high humidity, or exposed to temperatures higher than 70 °C.
The back of the tiles must be dry and free of dust, oils, or other non-stick substances.
Product storage
The product must be stored in covered spaces that are protected from humidity or precipitation.
Installation instructions
- Draw level lines.
- Preselect the decorative tiles and mix them from different boxes.
- Cut the tiles to the desired size, if necessary.
- Smooth the edges and brush the back of the decorative tiles with a wire brush for better adhesion. Make sure the back of the tiles are clean and dust free.
- Apply the adequate adhesive for the support, on both the installation surface and the back of the tiles.
- Apply the decorative tiles to the installation surface.
- Optionally, apply the protective spray to the entire surface of the installed decorative tiles.
Maintenance
- Use only PH-neutral detergent solutions for cleaning the tiles.
- Clean the tiles with a vacuum cleaner but avoid direct contact of the nozzle with the wall cladding.
- Do not clean the tiles with high-pressure devices. Otherwise, you may risk damaging them.
- For deep stains, seek professional advice. Avoid using non-specific cleaning products.
- Consult the producer’s product range for specific cleaning and protection solutions.
