Woodyteck Classic
- Description
- Technical Specifications
- User Guide
Description
Woodyteck Classic captures the timeless appeal of organic wood grain, seamlessly blending nature’s beauty with architectural finesse. Perfect for both interior and exterior settings, this design transports you to serene landscapes, creating a harmonious ambience wherever applied.
Technical Specifications
Product Data
| Shape | Z-shape  |
|---|---|
| Dimensions | 56 x 16 cm |
| Thickness | 1.0 – 2.0 cm |
| Color | Beige |
| Material | Cement based |
| Reaction to fire | |
| M Classification |
Packaging
| Pieces per box | 7 |
|---|---|
| Coverage per box | 0.57 sqm ±5% |
| Weight per box | 23.5 kg |
| Packaging type | Recycled cardboard box – 80% |
Installation
| Installation style | |
|---|---|
| Recommended joint width | 0 cm |
| Requires adhesive | Yes |
| 35.14kg ±5% |
Recommendations and specifications
Installation surfaces: Plaster, plasterboard, bricks, concrete, concrete bricks, plastered/rendered surfaces, wood, ceramic tiles, depending on the specifications of the used adhesive. The surface on which the product is installed must be in good condition, dry, dust free, stable, and protected against water infiltration.
Exceptions: The products should not be installed on the floor, ceiling, on surfaces or in areas with high humidity, or exposed to temperatures higher than 70 °C.
The back of the tiles must be dry and free of dust, oils, or other non-stick substances.
Product storage
The product must be stored in covered spaces that are protected from humidity or precipitation.
Installation instructions
- Draw level lines.
- Preselect the decorative tiles and mix them from different boxes.
- Cut the tiles to the desired size, if necessary.
- Smooth the edges and brush the back of the decorative tiles with a wire brush for better adhesion. Make sure the back of the tiles are clean and dust free.
- Apply the adequate adhesive for the support, on both the installation surface and the back of the tiles.
- Apply the decorative tiles to the installation surface.
- Optionally, apply the protective spray to the entire surface of the installed decorative tiles.
Maintenance
- Use only PH-neutral detergent solutions for cleaning the tiles.
- Clean the tiles with a vacuum cleaner but avoid direct contact of the nozzle with the wall cladding.
- Do not clean the tiles with high-pressure devices. Otherwise, you may risk damaging them.
- For deep stains, seek professional advice. Avoid using non-specific cleaning products.
- Consult the producer’s product range for specific cleaning and protection solutions.
