Decorative plaster solution mimicking klinker, ideal for quick and clean renovations.

Kodiak Spirit

Availability (Product status): In production
SKU: 5945763012790 Category: Decorative wall claddingDecorative brick Application: Only interior Look:

Download Kodiak Spirit resources

Download the product DataSheet (PDF): EN RO

Description

In the embrace of Kodiak Spirit brick, earthy tones dance harmoniously, accentuated by whispers of white and dark grey. Like an untamed wilderness, this brick unveils nature’s symphony.

Technical Specifications

Product Data

ShapeSoft rectangle Soft rectangle
Dimensions

24.7 – 26.2 x 4 – 4.4 cm

Thickness

2.0 cm

ColorGrey, Multicolor, Salmon, White
MaterialGypsum based
Reaction to fire

M Classification

Packaging

Pieces per box

69

Coverage per box0.90 sqm ±5% with grout joint 1.0 cm / 0.74 sqm ±5% without grout joint
Weight per box

12.0 kg

Packaging type

Recycled cardboard box – 80%

Installation

Installation style

Requires adhesive

Yes

Average weight/sqm12.25kg ±5% - Calculated with a joint width of 1.0 cm. The weight of the joint is not included in the calculation!

Allowed surfaces for installation

Plaster, plasterboard, bricks, concrete, concrete bricks, plastered/rendered surfaces, wood, ceramic tiles.
The surface on which the products are installed must be in good condition, dry, stable and protected against water infiltration.
Exceptions: The products should not be installed on the floor, ceiling, on surfaces or in areas with high humidity, or at temperatures higher than 40 °C.

Product storage

The product is stored only in spaces that are protected from moisture or bad weather.

Installation instructions

  1. Draw level lines.
  2. Preselect the decorative tiles.
  3. Smooth the edges and scrape the back of the decorative tiles for better adhesion.
  4. Cut the tiles to the desired size, if necessary.
  5. Apply the adequate adhesive for the support to the back of the tiles.
  6. Apply the decorative tiles to the wall, with a distance between them for the joint grout application.
  7. Fill the joints with grout to three quarters of the joint’s depth.
  8. Smooth the grout.

Maintenance

  • Use only PH-neutral detergent solutions for cleaning the tiles.
  • Clean the tiles with a vacuum cleaner but avoid direct contact of the nozzle with the tiles.
  • Do not clean the tiles with high-pressure devices. Otherwise, you may risk damaging them.
  • For deep stains seek professional advice. Avoid using non-specific cleaning products.